As I have to buy parts and bits for this build, I'll add it's cost here. My goal is to keep the cost below, or as close to $1K as possible. I know, a lofty goal at best. But that's what I'm aiming for.
Engine Management Costs
I broke these bits out from the main build cost, because not everybody will need it.
| Cost | Date | Description |
|---|---|---|
| $420.00 | 2009/2/11 | Complete Greddy EManage Ultimate (Used) $420 shipped from EBay |
| $30.00 | 2009/2/26 | Used GM 2-BAR MAP sensor and pigtail from EBay. |
| $140.00 | 2009/3/9 | Brand new Innovate LC-1 Wideband kit with o2 sensor ($132 + shipping on EBay) |
| $590.00 | on going | Total |
Current Build Cost
| Cost | Date | Description |
|---|---|---|
| $275.00 | 2008/02/10 | Used Mercedes C230 M62 Compressor from EBay ($247.50 + $27.50 shipping) |
| $40.00 | 2008/02/22 | Used 2004 Forester XT TMIC from subaruforester.org ($40 shipped) |
| $30.00 | 2008/03/05 | Used Forge Porsche/Audi BPV from EBay ($20 + $10 shipping) |
| $15.00 | 2008/03/24 | Sold OEM FXT BPV to a local WRX owner (-$15) |
| $12.00 | 2008/10/25 | Steel (3/16"x1.5"x4' angle) from Lowes (1/4"x2"x4' angle) |
| $12.00 | 2008/10/25 | Some E6011 welding rods and Aluminum Brazing Rods from Harbor Freight |
| $8.00 | 2008/10/25 | Steel (1/4"x1.5"x4' flat) |
| $10.00 | 2009/1/3 | 1/4"x12"x6" plate steel |
| $26.00 | 2009/1/3 | Gates T41232 Idler Pulley from O'Reilly Auto Parts |
| $19.00 | 2009/1/3 | Dayco 5050580/5PK1475 $19@PepBoys |
| $40.00 | Various nuts, washers and bolts picked up through out fabrication process | |
| $21.00 | 2009/1/19 | 3" Aluminum 45o Elbow from EBay ($10.50 + $8 shipping + tax) |
| $46.00 | 2009/1/19 | Aluminum flat plate and tubing for intake from SpeedyMetals ($28 + Shipping + Tax) - 2 x 3/8"x5"x12" flat aluminum - 2x2"x12" Intake Tube - 1x1"x12" Intake Tube |
| $63.00 | 2009/1/19 | Silicon Elbows from siliconeintakes ($54.00 + shipping + Tax) - 3"->2" 45o + 2" 45o + 1" 90o |
| $19.00 | 2009/1/25 | Spectre Flexible 3" Intake Tube from PepBoys |
| $35.00 | 2009/1/26 | Used Perrin Intercooler Y-Pipe from subaruforester.org ($35 shipped) |
| $20.00 | 2009/1/30 | 2 x 4oz bottles of GM Supercharger Oil from ZZPerformance on EBay ($6.99 ea + $6 shipping) |
| $35.00 | 2009/1/30 | Handfull of hose-clamps, vacuum line clamps and a tube of Mobile-1 Synthetic Grease for the BPV. All from PepBoys. |
| $11.50 | 2009/2/10 | NGK BKR7E-11 - One step colder plugs gapped to (.030) ($10 + tax) |
| $17.00 | 2009/2/10 | 1/8"-thick 3"x2"x18" piece of Aluminum Rectangular Tubing ($11 + $5 for the cut + tax) |
| $32.00 | 2009/3/2 | K&N RB-0900 Universal Air Filter Amazon ($32 + free shipping) |
| $90 | 2009/5/09 | Custom 2.75" Pulley made by Randall Allmand. ($90 shipped) |
| $60.00 | 2009/4/20 | Spline Plate Coupler welded to piece of Stainless Steel. |
| $20.00 | 2010/07/2 | Used Aluminum Crank Pulley from rs25.com |
| $140.00 | 2010/7/22 | Reworked Aluminum Crank pulley to 7" OD by Randal |
| $40.00 | 2010/7/22 | New Serpentine Belt (Napa/Gates 070622)1 |
| $20.00 | 2010/7/12 | Used Vortech Bypass Valve |
| $1065.00 | on going | Total |
Things I bought and used that are not 100% necessary
| Cost | Date | Description |
|---|---|---|
| $50.00 | 2008/04/10 | Used SX Performance Adjustable FPR #15404 from RS25.com ($50 shipped) |
| $30.00 | 2008/05/01 | Y-Block adapter and Weapon-R FPR adapter EBay ($30 + $10 shipping) |
| $20.00 | 2008/05/06 | Used 2006 STi Fuel Pump form nasioc.com ($20 shipped) |
| $100.00 | on going | Total |
Parts and Materials used for Throttle-Body Relocation
| Cost | Date | Description |
|---|---|---|
| $20.00 | 2009/09/10 | Used 1999 Throttle Body from RS25.com ($20 shipped) |
| $22.00 | 2009/12/17 | 15" of 1/4"x4" Aluminum Plate & 12" of 2"x3"x1/8" Box Aluminum |
| $40.00 | 2009/12/18 | 1" and 5/8" brass fittings, hoses, clamps, bolts, and misc bits from Lowes |
| $??.00 | 2009/12/18 | Silicone 90deg reducing Elbow |
| $82.00 | on going | Total |
Things I bought for the build that wont work or might not need
In other words, wasted money!! :(
| Cost | Date | Description |
|---|---|---|
| $80.00 | 2008/05/05 | Used MY99 intake Manifold ($50 + $30 shipping) - Doesn't look like I'll be using this though. |
| $150.00 | 2008/04/16 | SmoothFlowPulleys.com custom adjustable pulley for C230 M62 SC ($150 shipped) - Unfortunatly, this pulley isn't quite up to snuff. I'm going to have it tweaked locally. It'll increase the cost a little. |
| $150.00 | 2009/4/18 | The LAST tweak to the SC pulley. Had it re-welded and a few more bolts added. |
| $200.00 | 2009/2/16 | Had to have the pulley hub remade by a local machine shop - I had to eat the cost of programming the CNC machine!! D'OH! There goes my $1000 goal!! Hopefully if anybody needs one of these made it'll cost much less now. |
| $580.00 | on going | Total |